Preheat
Warm the garment 3–5 seconds to drop moisture and flatten the fiber.
APPLY IT
LIKE YOU MEAN IT.
Every order ships with the chart for that process. This page is the standing reference.
| Process | Temp | Time | Pressure | Peel | Second press |
|---|---|---|---|---|---|
| 3D DTF | 300–320°F / 149–160°C | 12–15 sec | Medium-firm | Cold or warm — test your film | 5–8 sec with cover sheet to set the hand |
| DTF | 280–315°F / 138–157°C | 10–15 sec | Medium | Hot or cold per film | 5 sec optional for a smoother finish |
| UV DTF | No heat | — | Firm squeegee / hand pressure | Peel carrier after burnish | None |
| Stickers | No heat | — | Burnish | Peel liner | None |
Charts are starting points. Presses vary. Always test a swatch on a new garment or hat block before a production run. We can adjust the note on your packing slip if you tell us your press model.
Place
Line it up. Cover with parchment or a Teflon sheet. Do not crush 3D height with a rock-hard second press.
Peel
Follow the film. If it lifts color, let it cool and peel again. Do not rip.
Lock
Second press to settle the adhesive. For 3D, keep this short so the dimension stays proud.
Wash care
INSIDE OUTCOLD WATERMILD SOAPLOW DRY OR AIRNO BLEACHNO DRY CLEAN
Artwork requirements
- PNG or PDF at 300 DPI, actual print size
- Transparent background for transfers
- Vector welcome: AI, EPS, SVG
- Convert text to outlines
- Keep raised 3D strokes thicker than hairline — think embroidery-weight marks, not 0.25 pt rules
- Call out spot whites or print-white-as-white if it matters
- One design per file unless you are ordering a gang sheet